IMPORTANT PLYOBOX RISER INFO:
The elitefts plyobox risers are built to increase the height of the elitefts™ 6 inch Plyobox Top. These risers are not intended or recommended to be jumped on.

These boxes were designed with "Purpose" first.

We feel that you need to understand the Shock Method (also known as Plyometrics) before you embark on creating a box intended to be used for that purpose. You do not want to design a box that will absorb all of the shock— to do so would be defeating much of the purpose of the programing.

Therefore, taking this into consideration, we have designed a Plyobox with an individually constructed Landing Top and individually constructed Risers (since each serves a different purpose). The top is constructed for landing and the risers are designed for increasing the height of the box. Simple concept, don't you think? That's what we thought, but apparently others have missed this one very simple aspect - or - don't understand the Shock Method in the first place.

Note: These risers were designed to increase the height of the 6-inch landing box and are not recommended to be used for landing. These were constructed in such a way as to enhance the use of Shock Method training, as well as to keep shipping costs down.

Riser Sizes
Available in 2.5, 6, 12, 18 and 24-inch

Custom Colors
Black

Navy Blue

Yellow

Burgundy

Red

Riser Specs

* 28x28x12

* 18 oz. non expanded vinyl cover

* Handles for better transport (not on 2.5-inch riser)

* Vinyl velcro flaps around the ENTIRE bottom edge perimeter for stronger stability.

* Extra-firm urethane foam core with with crosslinked polyethylene on the top and bottom. * Logo Side

Landing Top Specs

* 18 oz. non expanded vinyl cover

* Handles for better transport

* Vinyl velcro flaps around the ENTIRE bottom edge perimeter for stronger stability.

* Rebond foam core with crosslinked polyethylene on top and bottom. * Logo Top

Email This Product To A Friend

Link To This Product

ELITEFTS